manualshive.com logo in svg

Canon MultiPASS L60, User Manual, Page: 170 / 341

Share
Download
Canon MultiPASS L60 User Manual Download Page 170

6-42

Sending Faxes

Chapter 6

Sending With the Password/Subaddress
Feature

Some fax machines will only receive faxes from other fax machines if
they are sent using a password and subaddress that correspond to the
password and subaddress of the receiving fax machine. This feature
allows you to enter the password/subaddress (based on the ITU-T
standard) of the receiving fax before sending the document.

N

Make sure you have the other party’s password and subaddress. The
password and subaddress you enter must be identical to those of the
receiving fax.

To send a document with a password and subaddress, follow this
procedure.

N

Be sure to adjust the document feed lever before loading your
document. See page 6-6 for more details.

1.

Prepare the document and load it, face down, into the Automatic
Document Feeder (ADF).

❏

If necessary, you can adjust the resolution and contrast. See
page 6-13 for more details.

2.

Press 

FUNCTION

, then 

PWD/SUBADD.

SUBADDRESS

PSWD/SUBADDRESS

FUNCTION

Summary of Contents for MultiPASS L60






















































































































































































































































































































































Reviews:

No comments