Canon MultiPASS L60, User Manual, Page: 67 / 341

Chapter 2 Setting Up Your MultiPASS L60
2-35
Setting Up Your
MultiPASS L60
Loading Recording Paper
When the message LOAD PAPER appears in the LCD display, you need
to add paper to the multi-purpose tray. Here are a few tips you should
follow when you load paper into the multi-purpose tray.
❑
Use A4-size paper.
❑
Use standard 64–90 g/m 2 weight paper.
❑
The multi-purpose tray holds up to 100 sheets of 75 g/m 2 paper
(maximum 10 mm stack height).
❑
Let the paper run out before you refill the multi-purpose tray. Avoid
mixing new paper with paper remaining in the multi-purpose tray.
❑
Stack the paper so that the top and bottom edges and sides are
straight and even before placing it in the multi-purpose tray.
❑
Do not print on both sides of the paper. Doing so may cause several
sheets to feed into the unit at the same time.
N
❑
Do not use damp, curled, wrinkled, or torn paper as these can cause
paper jams or poor print quality.
❏
Highly textured or extremely smooth or shiny paper does not print
well.
❏
The laser printing process uses high temperatures to fuse toner to
the paper. Use paper that will not melt, vaporise, discolour, or emit
dangerous fumes at temperatures near 170°C. For example, do not
use vellum paper in a laser printer. Make sure any letterhead or
coloured paper you use can withstand high temperatures.
❏
Make sure the paper is free of dust, lint, and oil stains.
❑
To keep the paper from curling, do not open paper packs until you
are ready to use the paper. Store unused paper from opened packs
in a cool, dry location in the original packaging.
❑
Your MultiPASS L60 is factory-set to use A4-size paper. If you wish
to use letter- or legal-size paper, you must change the setting from
the FAX PRINTER menu. See pages 13-12 and 13-13 for more details
on changing the setting. You can also change this setting from the
MultiPASS Desktop Manager. See the MultiPASS Desktop Manager
User’s Guide for details.