Canon MultiPASS L60, User Manual, Page: 4 / 341

iv
Preface
Notice for Connection to Telecommunication Systems in
the United Kingdom and the Republic of Ireland
Approval Number 607912
Your Canon MultiPASS L60 has been approved against the requirements
of NTR3 for use in the UK. The CE mark is applied in respect of the
requirements of 72/23 EEC and 89/336 EEC.
It is intended for connection to analogue two wire public
telecommunication networks.
Connect the supplied cable to this socket first, then to the
telephone line.
This socket is intended for connection of the Canon optional
telephone. If required, an adapter to connect any piece of
approved telecommunications apparatus is available from your
Canon supplier.
Canon recommend that any additional equipment connected in the
installation is connected to this “handset” socket. Do not connect
additional equipment through parallel sockets elsewhere on the
telephone line.
Voltage and current available at these sockets is determined by the
network to which the line cable is connected. They will not normally
exceed the limits for TNV as described in EN60950.
Ringer Equivalence Number (REN) = 1
The REN is a guide to help calculate the maximum number of items of
apparatus that will ring when connected simultaneously to one phone
line. The total RENs of the individual items should not exceed 4.
Correct ringing may not always be possible even when total REN does
not exceed 4. The REN value of a BT telephone is assumed to be 1 unless
otherwise marked.
This equipment is not intended or recommended for making calls to
emergency services.