manualshive.com logo in svg

Canon MultiPASS L60, User Manual, Page: 113 / 341

Share
Download
Canon MultiPASS L60 User Manual Download Page 113

Chapter 5

Speed Dialling

5-9

Speed Dialling

Using One-Touch Speed Dialling

Once you have registered your numbers under one-touch speed dialling
buttons, you can use them to send documents as follows:

N

Be sure to adjust the document feed lever before loading your
document. See page 6-6 for more details.

1.

Prepare the document and load it, face down, into the Automatic
Document Feeder (ADF).

❏

If necessary, you can adjust the resolution and contrast. See
page 6-13 for more details.

2.

Press the one-touch speed dialling button assigned to the number to
which you wish to fax.

Ex:  

❏

The name registered under that one-touch speed dialling
button is displayed. If no name is registered, the number
registered under that button will be displayed.

❏

If you mistakenly press the wrong one-touch speed dialling
button, press the 

STOP

button then press the correct button.

❏

If no fax number is assigned to the one-touch dialling button
you press, the LCD displays NO TEL #. If this happens, make
sure you pressed the correct button and that the number you
want to dial is registered under that button.

3.

Press 

START/COPY

.

❏

If you do not press the 

START/COPY

button within five

seconds of pressing the one-touch speed dialling button, the
MultiPASS L60 will begin sending automatically. If you do not
want the MultiPASS L60 to send automatically, you need to
change the AUTO START TX setting. See pages 13-8 and 13-9
for more details.

TEL=CANON U.K.

Summary of Contents for MultiPASS L60






















































































































































































































































































































































Reviews:

No comments