Canon MultiPASS L60, User Manual, Page: 245 / 341

Chapter 11 Frequently Asked Questions
11-21
Fr
equently Asked
Questions
Faxing Problems
Use the following tables to solve problems that can occur when sending
and receiving faxes with the MultiPASS L60.
Sending Faxes
Problem Possible cause Solution
Cannot send a The MultiPASS L60 may If you suspect this, unplug
fax? have overheated and shut the MultiPASS L60 and
itself down. let it cool for several
minutes. Then plug it back
in and try sending again.
The MultiPASS L60 may Make sure the MultiPASS
not be set for the type of L60 is set for the type of
telephone line you have telephone line you have.
(pulse/tone). See page 3-14 or the
MultiPASS Desktop
Manager
User’s Guide . (If
you are not sure what type
of line you have, contact
your local telephone
company.)
The document may not Remove the document,
have been set correctly in stack it, and feed it into
the Automatic Document the Automatic Document
Feeder (ADF). Feeder (ADF) again.
The one-touch or coded Check the content of the one-
speed dialling number you touch or coded speed
used may not be registered. dialling button and make
sure it was registered
correctly. See Chapter 5 or
the MultiPASS Desktop
Manager
User’s Guide .
The receiving fax machine Call the other party and
may be out of paper. make sure they have paper
in their fax machine.
The MultiPASS L60 may be Allow time for the current
sending another document document to finish
from memory. sending.