Canon MultiPASS L60, User Manual, Page: 184 / 341

7-6
Receiving Faxes Chapter 7
What Happens When Fax/Tel Mode is Selected
You can select these options in the RX MODE submenu of the RX
SETTINGS menu when Fax/Tel Mode is selected. See below for details
on changing the settings.
N
You can also set these options from the MultiPASS Desktop Manager.
See the MultiPASS Desktop Manager
User’s Guide for details.
*In Australia, the fax plays “You are connected. Please hold.” after answering.
Telephone Fax Fax
Sending document
manually
Sending document
automatically
MultiPASS L60 answers without ringing*
MultiPASS L60 listens for FAX TONE
(For 8 sec.)
FAX TONE
detected
FAX TONE is not detected
Document received
automatically.
MultiPASS L60 starts ringing
Pick up the
handset to talk.
If you don’t pick up the handset
(within 22 sec.)
F/T SW ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT
DISCONNECT
RECEIVE
(Factory default setting)
(FAX TONE is detected
and the MultiPASS
L60 switches to
receive mode.)
MultiPASS L60
disconnects the call.
Not all fax machines are capable of sending a FAX
TONE. For those cases if you set the F/T SW
ACTION to RECEIVE, the MultiPASS L60
switches to receive mode automatically and starts
receiving the document. If no document comes in,
it disconnects after approximately 35 seconds.
F/T RING TIME
(Factory default
setting = 22 sec.)
RING START TIME
(Factory default
setting = 8 sec.)
Telephone charges
begin for caller.
Type of call