Canon MultiPASS L60, User Manual, Page: 263 / 341

Chapter 11 Frequently Asked Questions
11-39
Fr
equently Asked
Questions
MEMORY FULL
PLEASE WAIT
MEMORY USED nn%
NO ANSWER
NO RX PAPER
NO TEL #
NOT AVAILABLE
PLEASE WAIT
REC’D IN MEMORY
—
—
#005
#012
#022
—
—
—
The MultiPASS L60 is
sending a fax and its
memory is full.
Shows how much of the
MultiPASS L60’s memory
is in use.
The receiving fax machine
does not answer.
The other party’s fax
machine is out of paper
and its memory is full.
The one-touch or coded
speed dialling number has
not been registered.
In manual sending via the
handset, you tried to use a
one-touch speed dialling
button or a coded speed
dialling code that has a
group registered in it.
The MultiPASS L60 is
warming up.
The paper or toner ran
out, or a paper jam
occurred, so the
MultiPASS L60 received
the document in memory.
Wait until the fax is sent.
The MultiPASS L60
continues to send the fax
as memory becomes
available.
If you need more memory,
print or send any
documents stored in
memory.
Make sure you dialled the
correct number. Try again
later.
Contact the other party
and have them add paper
to their fax machine.
Register the number. See
Chapter 5.
In manual sending via the
handset, you cannot send
a document to multiple
destinations. Send the
document to one
destination at a time.
Wait until the time and
receiving mode appear in
the LCD display, then
begin.
Add paper to the multi-
purpose tray, change the
toner cartridge, or clear
the paper jam, as needed.
When the problem is
solved, the MultiPASS L60
automatically prints the
document stored in
memory.
Message Error Code Cause Action