Canon MultiPASS L60, User Manual, Page: 182 / 341

7-4
Receiving Faxes Chapter 7
Receiving Faxes and Phone Calls Automatically:
Fax/Tel Mode
See page 7-3 to select Fax/Tel Mode.
Set this mode if you want your MultiPASS L60 to automatically switch
between voice and fax calls. For this mode, you need to have the
optional handset or a telephone connected to your unit.
You can control precisely how your MultiPASS L60 handles incoming
calls by adjusting the settings described below.
Setting Up Fax/Tel Mode
When you select Fax/Tel Mode, you can also set the following options.
N
The options described below can also be set from the MultiPASS
Desktop Manager. See the MultiPASS Desktop Manager
User’s Guide for
details.
❏
RING START TIME
When a call comes in, the unit checks to see if it is a person wishing
to speak to you or a fax machine trying to send a document. If your
unit does not have enough time to detect the fax tone, it assumes the
call is from a telephone. Use the RING START TIME setting to
increase the time the unit takes to check whether a call is from a fax
machine or a telephone. You can select a time between 0 and 30
seconds; the default is 8 seconds.
❏
F/T RING TIME
When your unit is set to receive both fax and telephone calls
automatically, it rings to alert you to pick up the handset if the call is
from a person. If you do not pick up the handset within a certain
amount of time, the unit stops ringing. Use this option to change the
number of times the unit rings, from 10 to 60 seconds. The default is
22 seconds.