manualshive.com logo in svg

Canon MultiPASS L60, User Manual, Page: 276 / 341

Share
Download
Canon MultiPASS L60 User Manual Download Page 276

13-2

The Menu System

Chapter 13

Understanding the Menu System

The MultiPASS L60 menu system allows you to customise the way your
unit operates. The menu system consists of seven menus, each
containing settings that control different functions of your MultiPASS
L60. This chapter outlines the various menus and shows you how to
use them.

Please note that all settings in the menu system can also be adjusted
from the MultiPASS Desktop Manager, and that settings you adjust
from the MultiPASS Desktop Manager will override any settings
entered directly from the MultiPASS L60 operation panel. Also note that
any settings adjusted via the operation panel will not be displayed in
the MultiPASS Desktop Manager. For details on using the MultiPASS
Desktop Manager, refer to the MultiPASS Desktop Manager 

User’s

Guide

.

N

❏

The factory default settings in the following tables are shown in

bold

type.

❏

If your MultiPASS L60 is connected to a PC, we recommend you
use the MultiPASS Desktop Manager to adjust any settings.

Accessing the TEL REGISTRATION Menu

1.

Press 

FUNCTION

.

2.

Use 

<

<

or 

>

>

to select TEL REGISTRATION.

3.

Press 

START/COPY

.

4.

Use 

<

<

or 

>

>

to select the item you want to set or change.

1-TOUCH SPD DIAL

TEL REGISTRATION

FUNCTION

Summary of Contents for MultiPASS L60






















































































































































































































































































































































Reviews:

No comments