Canon MultiPASS L60, User Manual, Page: 127 / 341

Chapter 5 Speed Dialling
5-23
Speed Dialling
Using Group Dialling
To send a document to a group of numbers, follow these instructions.
N
Be sure to adjust the document feed lever before loading your
document. See page 6-6 for more details.
1. Prepare the document and load it, face down, into the Automatic
Document Feeder (ADF).
❏
If necessary, you can adjust the resolution and contrast. See
page 6-13 for more details.
2. Enter the group(s) stored under a one-touch speed dialling
button(s) and/or coded speed dialling code(s).
Ex:
Ex:
❏
If you make a mistake when selecting a group, press the STOP
button and start again.
❏
The name registered under that one-touch speed dialling
button or coded speed dialling code is diplayed. If no name is
registered, GROUP DIAL is displayed.
❏
If you press a one-touch speed dialling button or coded speed
dialling code that has no group (or fax number) registered
under it, the LCD displays NO TEL #. Make sure you pressed
the correct one-touch speed dialling button or entered the
correct coded speed dialling code, and that the group you want
has been registered correctly under that button or code.
❏
After entering the first one-touch speed dialling button or
coded speed dialling code, you have five seconds to enter
another speed dialling button or code before the MultiPASS
L60 begins sending automatically. If you have entered more
than one speed dialling button or code, the MultiPASS L60
waits for 10 seconds before it begins sending. If you do not
want the MultiPASS L60 to send automatically, you need to
change the AUTO START TX setting. See pages 13-8 and 13-9
for more details.
TEL=Canon GROUP1
TEL=Canon GROUP2