Canon MultiPASS L60, User Manual, Page: 35 / 341

Chapter 2 Setting Up Your MultiPASS L60
2-3
Setting Up Your
MultiPASS L60
Choosing a Location for Your MultiPASS L60
Before unpacking your MultiPASS L60, follow these guidelines to
choose an appropriate location for the unit.
C
Please review the information provided in “Safety Instructions” on
pages 1-15 to 1-17, to make sure you are installing your MultiPASS L60
for safe use.
❏
Put the MultiPASS L60 in a cool, dry, clean, well ventilated place:
• Make sure the area is free from dust.
• Make sure the location is not affected by extreme temperature
fluctuations, and remains between 10° and 32.5°C.
• Make sure the area’s relative humidity is always between 20%
and 80%.
❏
Keep the MultiPASS L60 away from direct sunlight.
❏
If possible, place the MultiPASS L60 near an existing telephone
outlet, to allow for an easy connection of the telephone line to the
unit.
❏
Place the MultiPASS L60 near an electrical wall outlet that provides
200 to 240-volt AC (50 to 60 Hz) power.
❏
Place the MultiPASS L60 near the PC you will be connecting it to.
Make sure you can reach it easily, as you will be using the
MultiPASS L60 as a printer, fax machine, copier, scanner, and
telephone.
❏
Do not plug the MultiPASS L60 into the same circuit as an appliance
such as an air conditioner, electric typewriter, television, or copier.
Such devices generate electrical noise that can interfere with your
unit’s ability to send or receive faxes.
❏
Set the MultiPASS L60 on a flat, stable, vibration-free surface that is
strong enough to support its weight (about 8.6 kg).