manualshive.com logo in svg

Canon MultiPASS L60, User Manual, Page: 124 / 341

Share
Download
Canon MultiPASS L60 User Manual Download Page 124

5-20

Speed Dialling

Chapter 5

To store a group under a coded speed dialling code:

5.

Press 

CODED DIAL

, then use the numeric buttons to enter an

unused two-digit code (00 to 99).

Ex:  

❏

If a group or number is already registered under the code you
select, GROUP DIAL or CODED DIAL is displayed.

N

❏

Each one-touch speed dialling button or coded speed dialling code
can store either a name and number for speed dialling, or a group.
Be careful not to override speed dialling numbers and names when
creating and registering groups.

❏

If you wish to register a group under a one-touch speed dialling
button or coded speed dialling code already registered for speed
dialling, or if you want to re-enter a group, you must delete the
previous information first. See pages 5-6 and 5-14 for more details.

6.

Press 

START/COPY

twice.

7.

Enter the speed dialling numbers you want to store in the group.

❏

To enter in the group a number stored under a one-touch speed
dialling button, press 

FUNCTION

, press the desired one-touch

speed dialling button(s), then press 

FUNCTION

again.

01=CANON EUROPE

TEL=

TELEPHONE NUMBER

✱

21=

Summary of Contents for MultiPASS L60






















































































































































































































































































































































Reviews:

No comments