manualshive.com logo in svg

Canon MultiPASS L60, User Manual, Page: 123 / 341

Share
Download
Canon MultiPASS L60 User Manual Download Page 123

Chapter 5

Speed Dialling

5-19

Speed Dialling

Group Dialling

If you frequently send faxes to the same group of numbers, you can
create a “group”. Groups are stored under one-touch speed dialling
buttons or coded speed dialling codes and can contain as many as 115
numbers.

Creating Groups for Group Dialling

The numbers you register in a group must already be stored under one-
touch speed dialling buttons or coded speed dialling codes. Each group
is stored under a one-touch speed dialling button or a coded speed
dialling code.
Create groups for group dialling as follows:

1.

Press 

FUNCTION.

2.

Use 

<

<

or 

>

>  

to select TEL REGISTRATION.

3.

Press 

START/COPY

, then use 

<

<

or 

>

>

to select GROUP DIAL.

4.

Press 

START/COPY

.

To store a group under a one-touch speed dialling button:

5.

Use 

<

<

or 

>

>

to select an unused one-touch speed dialling button (01

to 16*).

Ex:  

❏

If a group or number is already registered under the button you
select, GROUP DIAL or 1-TOUCH DIAL is displayed.

*Users in the UK only: If you have set the M-KEY SETTING in the USER

SETTINGS to ON, “M-KEY” will be displayed if you select the one-touch
speed dialling button 

16

. You cannot use this button for group dialling.

03=

GROUP DIAL

TEL REGISTRATION

FUNCTION

Summary of Contents for MultiPASS L60






















































































































































































































































































































































Reviews:

No comments