78
Specify the camera name and external input/output devices, and configure the system and installation of the camera.
Camera Name
Set the camera name.
[Camera Name]
Enter any camera name. Be sure to enter a name in [Camera Name].
Note
The camera name to be specified here is different from that to be entered using buttons on the back of the camera.
System Settings
Select the video signal format, tele-converter settings, and whether to use video and audio output terminals, buttons on the
back of the camera, and a remote controller.
Note
Depending on the setting value of [System Frequency] or [System Frame Rate], nothing may be displayed on the external monitor. Please
refer to "Troubleshooting" of "Button Operation Guide" and change the settings.
[System Frequency]
Select [59.94 Hz] for the network-distributed video.
When you change [System Frequency], [System Frame Rate] is automatically updated.
[System Frame Rate]
Select [29.97P] for the network-distributed video.
Available setting options vary depending on the value of [System Frequency].
[Basic] > [System]
Setting General Camera Controls
Important
The combination of the video signal format that can be used as network-distributed video is as follows.
[System Frequency]: [59.94 Hz]
[System Frame Rate]: [29.97P]
[System Resolution]: [1920 x 1080]
For combinations other than the above, the network-distributed video will be black images.
The following settings can be configured here.
• Camera Name
• System Settings
• Installation Conditions
• Camera Position Control
• External Input Device
• External Output Device
