Canon ME20F-SHN Network Operation Manual Download Page 52

Page: 52 / 185

Note

If you enable Digital PTZ while receiving H.264 video, the received video is switched to JPEG.

Cropping Video With Digital PTZ Panel

The [Digital PTZ] button changes active (purple), and the Digital PTZ panel is shown in the control display area.

The preview frame operations are the same as with the Viewer PTZ (P. 50).

The preview frame size can be set to one of the following five sizes: 640 x 360, 512 x 288, 384 x 216, 256 x 144,

and 128 x 72.

Note

The preview frame will move in steps. Fine-tuned movement is not possible.

The video of the area inside the manipulated preview frame is magnified to fill the video display area.

Note

The Digital PTZ uses digital zoom, so the higher the digital zoom ratio, the lower the video quality.

Click the [Digital PTZ] button.

In the Digital PTZ panel, move and resize the preview frame.

Preview Frame

Summary of Contents for ME20F-SHN


























































































































































































Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands

Canon ME20F-SHN, Network Operation Manual

Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands