Canon ME20F-SHN Network Operation Manual Download Page 56

Page: 56 / 185

Open the [Video and Audio] menu to set the audio reception from the camera.

Receiving Audio

Receive audio from the microphone connected to the camera and play it back in the Viewer.

Audio reception starts.

The [Audio Reception] button icon will change to active (purple) while receiving audio.

Note

• To receive audio, you must connect the microphone to the camera and specify the type of the microphone from [Video and

Audio] > [Audio] > [MIC Power] (P. 99) and set [Server] > [Audio Server] > [Audio Transmission from the Camera] to [Enable]
(P. 104) on the Setting Page.

• While the icon is active (purple), audio is constantly received even if you close the [Video and Audio] menu.

Receiving Audio

In the

[Video and Audio] menu, click the [Audio Reception] button.

In [Output Volume], adjust the volume to an appropriate level using the slider.

Summary of Contents for ME20F-SHN


























































































































































































Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands

Canon ME20F-SHN, Network Operation Manual

Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands