132
This explains functions common to video detection.
Configuring Operations for “Detected” ([Event] Tab)
Set operations to be performed upon detection of changes in a subject.
(1)
Specify Operation Timing (Multiple Selections Possible)
[ON Event Operation]
When selected, the operations set in (2) are performed when the mode becomes “detected”.
[OFF Event Operation]
When selected, the operations set in (2) are performed when “detected” mode ends.
[Detected mode Operation]
When selected, the operations set in (2) are performed while “detected” mode is active.
(2)
Specify Event Operation (Multiple Selections Possible)
[Video Record]
When selected, video recording begins according to the timing specified in (1). [Memory Card] (P. 146) must be set in
advance.
(3)
External Device Output Operations
[External Device Output for ON Event]
Select this to start or pause output to an external device when the mode becomes “detected”, and to select the
operation (active or inactive).
[External Device Output for OFF Event]
Select this to start or pause output to an external device when “detected” mode ends, and to select the operation
(active or inactive).
Restarting Intelligent Function
If the background video has changed while you were specifying settings or detection results are not as specified, restart
the Intelligent Function.
[Event] > [Intelligent Function]
- Shared Operations -
(1)
(3)
(2)
1
If you have not yet obtained the camera control privileges, click the [Obtain/Release Camera Control Privileges]
button and obtain the control privileges.
2
Click [Restart intelligent function].
