Sett
ing Page
4
153
You can check the camera operations and connection history, and set log message e-mail transmission.
View Logs
Display a history of camera operations and connections.
[View Logs]
If you click [View], the log messages saved since the camera was started are displayed.
For details on log messages, please refer to “List of Log Messages” (P. 158).
Log Notifications
Set the mail server and e-mail address to use for log notification.
[Use log notifications]
If you select [Enable], the following setting items for log notification are displayed.
[Notification Level]
Select the log notification level.
For details on levels of log messages, please refer to “Log Messages on the Camera” (P. 158).
[Mail Server Name]
Enter the host name or IP address of the SMTP server.
[Mail Server Port]
Enter the port number for the SMTP server (factory default setting is [25]).
[Sender (From)]
Enter the e-mail address of the sender.
[Recipient (To)]
Enter the e-mail address of the recipient.
[Authentication]
Select an authentication method suited to the destination SMTP server.
[User Name], [Password], [POP Server]
Enter the user name and password needed for authentication, and the POP server host name or IP address when e-mail
authentication is set to [POP before SMTP].
Enter the user name and password needed for authentication when e-mail authentication is set to [SMTP-AUTH].
[Maintenance] > [Log]
Checking/Sending Camera Log Information
The following settings can be configured here.
• View Logs
• Log Notifications
