Canon ME20F-SHN Network Operation Manual Download Page 166

Page: 166 / 185

166

A274 Event buffer for upload overflowed
[warning]

A275 Image buffer for upload overflowed
[warning]



Memory card warning

M201 Memory card is write-protected
[warning]

M203 Not enough space on memory card
[warning]

M204 Invalid file removed [warning]

M205 Checking management information file
[warning]

M206 Invalid management information
removed [warning]

M207 Memory card removed without
unmounting [warning]



ONVIF warning (RTP)

R101 RTP session timeout [notice]

R102 Information acquisition failure (RTP
payload size) [notice]

R102 Information acquisition failure (IP
address) [notice]

R103 RTSP authentication failure [notice]

Description

event queue is full (A274)

Meaning

Event buffer for upload overflowed.

Countermeasure

Make adjustments to reduce the
number of event occurrences.

Description

buffer queue is full (A275)

Meaning

Image buffer for upload overflowed.

Countermeasure

Make adjustments to reduce the
number of event occurrences. Also
adjust the video quality, video size and
frame rate for upload.

Description

Readonly filesystem (M201)

Meaning

A write-protected memory card is
inserted.

Description

There is not available space (M203)

Meaning

Insufficient memory card capacity.

Description

Invalid file (%1) was removed. (M204)

Name of removed file

Meaning

An invalid file was removed.

Description

%1 checking management file (M205)

Start | Finish

Meaning

The memory card may have been
removed without being unmounted.
Start/finish checking management
information file.

Description

Invalid db information(%1)(%2) was
removed(M206)

Name of management information file
containing invalid information

ID of invalid information

Meaning

Invalid management information was
removed.

Description

Memory card was pulled before
unmount. (M207)

Meaning

Memory card was removed when
mounted.

Description

session timeout: session ID=%1
(R101)

Session ID

Meaning

RTP session has timed out.

Description

cannot get parameter:
RTP_payload_size (R102)

Meaning

Information acquisition has failed (RTP
payload size).

Description

cannot get parameter: IP_address
(R102)

Meaning

Information acquisition has failed (IP
address).

Description

RTSP authorization error (R103)

Meaning

RTSP authentication has failed.

Summary of Contents for ME20F-SHN


























































































































































































Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands

Canon ME20F-SHN, Network Operation Manual

Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands