B
e
fore Use
1
13
The following software is available for efficiently configuring and operating the camera.
Camera Operations and Settings
Camera operations are performed using the Camera Viewer/Mobile Camera Viewer.
Camera settings are specified from the Setting Page.
Camera Viewer (P. 29) /Mobile Camera Viewer
Controls the camera, and monitors video and various events.
You can use the Camera Viewer (mainly for computers) and the Mobile Camera Viewer (mainly for devices with a
screen size of 7 inches or less).
The functions available in the Viewer differ according to the user authority (P. 33).
Note
For details on using Mobile Camera Viewer, please refer to “Mobile Camera Viewer Operation Guide”.
The Setting Page is for the administrator to configure and manage the camera.
Software to Install on the Computer
The following software can be installed on the computer to be used.
Note
.NET Framework 3.5 SP1 (when using Internet Explorer 9) or .NET Framework 4.5 (when using Internet Explorer 10/11) is necessary to use
Camera Management Tool and Recorded Video Utility.
If it is not installed on the computer, it will be automatically installed when using the installer (P. 20).
Camera Management Tool
This tool is used for batch managing multiple cameras, from initial settings to performing maintenance. The Camera
Management Tool can perform the following tasks.
• Detecting cameras
• Set various camera settings.
• Display the Viewer and the Setting Page.
• Update firmware, back up/restore settings, perform memory card and other operations, as well as camera
maintenance.
For details on uses and functions, please refer to “Camera Management Tool User Manual”.
The Camera Management Tool can be installed from the installer.
Installer name:
VBToolsInstall.exe
Camera Software
