Canon ME20F-SHN Network Operation Manual Download Page 150

Page: 150 / 185

150

• Administrator Password

• Network Settings

• NTP Server

• HTTP Server

• Host Access Restrictions

• Time Zone

• Certificates

• Private Key

• IPsec

If you set this to [Do not save], the above settings are also initialized.

Since the administrator account is also initialized, you will become unable to connect to the camera. Use the Camera

Management Tool to configure the initial settings.

[Restore Default Settings]

The initial settings are restored according to the selection in [Network Settings] after rebooting.

Note

• It is recommended that you back up each current setting before you click [Exec] in [Restore Default Settings].

• The camera can also be restored to factory default settings using the reset switch. Note, however, that this will reset all camera settings

to factory default settings except for date and time (P. 173).

Summary of Contents for ME20F-SHN


























































































































































































Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands

Canon ME20F-SHN, Network Operation Manual

Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands