108
Note
An icon in the [Event and Input/Output] menu of the Camera Viewer will indicate when there is an external device input event (P. 57).
[External Device Input Event]
Select whether to use the input from an external device, such as a connected sensor, as an event.
[Operation Mode]
Select the circuit condition to suit the signal input from the connected external device.
When [Normally Open] is set, an active event occurs when the terminals of the external device close, and an inactive event
occurs when the terminals open.
When [Normally Close] is set, an active event occurs when the terminals of the external device open, and an inactive event
occurs when the terminals close.
[Active Event Operation]
Select the operation to be performed when an active event is triggered.
If [Enable] is set, [Preset] and [Video Record] will be executed according to their settings when an active event is triggered.
[Inactive Event Operation]
Select the operation to be performed when an inactive event is triggered.
If [Enable] is set, [Preset] and [Video Record] will be executed according to their settings when an inactive event is
completed.
[Ongoing Active Event Operation]
Select the operation to be performed during an active event. This can only be set when [Active Event Operation] is set to
[Enable].
If [Enable] is set, [Video Record] will be executed according to their settings during the active event.
[Preset]
If you specify a preset, the camera angle will automatically move to the preset location when an external device input event
is triggered.
It is necessary to set presets beforehand with [Camera] > [Preset] (P. 89).
[Video Record]
Select whether to record video depending on the event.
If you select [Enable] and an external device input event is triggered, video will be transmitted to a memory card.
[External Device Output for Active Event]
Select the actions of external device output when an active event is triggered.
[External Device Output for Inactive Event]
Select the actions of external device output when an inactive event is triggered.
[Infrared Switching]
Select the infrared switching behavior when an external device input event is triggered.
When [Switch to Normal Capture] is set, switches to normal capture when an active event is triggered, and switches to the
infrared mode when an inactive event is triggered.
When [Switch to Infrared] is set, switches to the infrared mode when an active event is triggered, and switches to normal
capture when an inactive event is triggered.
Important
When the [Infrared Switching] setting switches the modes between normal capture and infrared, camera control privileges are released,
even if the user has obtained those camera control privileges using the Camera Viewer or other camera control applications.
