Canon ME20F-SHN, Network Operation Manual

Page: 162 / 185

162
V421 Intelligent service error [crit]

Uploader error
A470 Uploader initialization failed [crit]

Memory card error
M301 Memory card control module error [err]
M302 Cannot remove invalid file [err]
M303 Cannot process directory [err]
M304 Failed to recreate management
information [err]
M305 Error when writing a video file [err]
M400 Failed to initialize a memory card [crit]

ONVIF error (RTP)
R301 Distribution communication error [err]
R302 Parameter acquisition failure [err]
Description intelligent working error [%1][%2].
(V421)
%1 Error number
%2 Cause of error
Meaning An error that does not permit recovery
occurred while intelligent service was
running.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description uploader initialization failure - %1
(A470)
%1 Error number
Meaning The uploader could not be initialized.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description %1 process failure (M301)
%1 mount or unmount
Meaning Mount or unmount process failed.
Description Invalid file (%1) can not remove.
(M302)
%1 Name of removed file
Meaning The invalid file could not be removed.
Description Can not open directory(%1)(M303)
%1 Directory name
Meaning Could not open directory to be
processed.
Description Fail updating management
file(%1)(M304)
%1 Management information identification
number
Meaning Process to recreate management
information failed.
Description write error %1 (%2) (M305)
%1 Video file path
%2 Reason for error
Meaning An error occurred when writing a video
file.
Description Fail SD card initialization(%1).(M400)
%1 Card initialization NG (det), power
supplies control NG (proc)
Meaning Process to initialize a memory card
failed.
Description message queue open error. %1 (R301)
%1 Modules that generate errors
RTP_CTRL_QUEUE
RTP_DATA_QUEUE
VIDEO_CTRL_QUEUE
VIDEO_DATA_QUEUE
AUDIO_CTRL_QUEUE
AUDIO_DATA_QUEUE
EVENT_CTRL_QUEUE
RECVQ_META
SENDQ_MEDIA
Meaning A communication error occurred
between modules.
Countermeasure If the problem persists after repeated
attempts and rebooting, the camera
may be faulty. Arrange for servicing.
Description cannot get parameter: %1 (R302)
%1 user_account: User account
IP_address: IP address of the camera
profile_media_configuration:
MediaConfiguration information
RTSP_port_number: RTSP port number
Meaning Parameter acquisition has failed.