128
How to Configure Intrusion Detection
Set the area for which you want to detect intrusions.
The decision point is indicated by a cross on the detection frame of the moving object.
Set the size ratio of moving objects for the entire screen.
When the setting values or slider is changed, an indicator representing the object size is shown for one second in
the center of the video display area allowing you to check the size ratio while specifying the setting.
Detection Status for Intrusion Detection
All moving objects detected are displayed with profile lines.
1
In the video display area, draw the area in which you would like to detect intruding objects (P. 119).
2
Configure [Duration (Sec)] for the time required for an object to enter a detection area, and be detected as an
intrusion.
3
In [Decision Point], select the point of a moving object that will be used for triggering intrusion detection when the
moving object enters a detection area.
4
Configure the size of the moving object needed to trigger detection in [Object Size (%)].
Detection Frame
Decision point (bottom center)
Object Size Indicator
Detection Area