Canon ME20F-SHN Network Operation Manual Download Page 31

Page: 31 / 185

Camera Viewer

The authentication screen for the Viewer is displayed.

The Camera Viewer is displayed.

Note

While color bars are output (refer to "Setup Guide"), video cannot be displayed with the Camera Viewer.



User Authentication

When you use the Viewer and the Setting page, an authentication screen is displayed, and you are prompted to enter

a user name and password.

If you enter the wrong user name or password, you will not be able to connect to the camera. Enter the correct user

name and password and connect to the camera.

When [Basic] > [Viewer] > [Viewer Settings] > [User Authentication] on the Setting Page is set to [Do not

authenticate], the authentication screen is not displayed when connecting the Viewer.

Enter the administrator name and administrator password, and click [OK].

Summary of Contents for ME20F-SHN


























































































































































































Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands

Canon ME20F-SHN, Network Operation Manual

Search results

Summary of Contents for ME20F-SHN

Reviews:

Related manuals for ME20F-SHN

Brands by name

Popular brands