Canon Finisher-AK1, Service Manual

Page: 314 / 374

6
6
6-6
6-6
Troubleshooting > Drive/Sensor check > Sensor
Troubleshooting > Drive/Sensor check > Sensor
DIPSW(SW382) Name details
1 2 3 4 5 6 7 8
- - On On On - On On M111 Saddle trailing edge
moving motor
After pressing ENTER to start the
motor, use +/- to move in units of 20
mm in the range of 0 to 80 mm. Press
ENTER again to terminate the motor
(Home).
- - On On On On - - M112 Saddle alignment
roller motor
After pressing ENTER to start the
motor (665 mm/s), use +/- to switch
the speed (180 mm/s, 250 mm/s and
665 mm/s). Press ENTER again to
terminate the motor.
- - On On On On - On M110 Saddle trailing edge
holding motor
After pressing ENTER to start
the motor, use + (to engage)/- (to
disengage). Press ENTER again to
terminate the motor.
- - On On On On On - - After pressing ENTER, initialization is
performed.
- - On On On On On On SL3
SL103
SL104
SL105
"Saddle path switch
solenoid
Alignment roller
disengage solenoid
(upper)
Alignment roller
disengage solenoid
(lower)
Lead edge gripper
solenoid
"
"After pressing ENTER, the solenoid
turns ON/OFF in the following order,
and then automatically terminates.
(1) Lower Path/Saddle Path Switch
Flapper (2) Alignment Roller Solenoid
(Upper) (3) Alignment Roller Solenoid
(Lower) (4) Leading Edge Gripper
Solenoid"
- On - - On On On On - folding opration After pressing ENTER to start fold
operation , press + or -. Then, place
paper on the Saddle Unit. When
pressing -, stack processing starts.
Press ENTER to terminate the
operation (the size is A3).
T-6-1
Sensor
DIPSW(SW382)
1 2 3 4 5 6 7 8
- On - On - - - -
display Name Lit Blinking
1 PS1 Front door sensor Closed Open
2 PS2 Upper cover sensor Closed Open
3 PS3 Inlet sensor Paper present Paper absent
4 PS4 Shift unit trailing edge sensor Paper present Paper absent
5 PS5 Upper delivery sensor Paper present Paper absent
6 PS6 Lower delivery sensor Paper present Paper absent
7 PS7 Horizontal registration detection unit HP
sensor
HP Other than HP
8 PS8 Shift roller unit HP sensor HP Other than HP
9 PS9 Feed roller HP sensor HP Other than HP
A UN22 Lower path sensor PCB Paper present Paper absent
b PS43 Inlet roller HP sensor HP Other than HP
DIPSW(SW382)
1 2 3 4 5 6 7 8
- On - On - - - On
display Name Lit Blinking
1 PS11 Front alignment HP sensor HP Other than HP
2 PS12 Rear alignment HP sensor HP Other than HP
3 PS13 Processing tray HP sensor HP Other than HP
4 PS14 Stack delivery auxiliary tray HP sensor HP Other than HP
5 PS15 Paper edge area sensor 1 Detected Not detected
6 PS16 Paper edge area sensor 2 Detected Not detected
7 PS17 Processing tray paper sensor Paper present Paper absent
8 PS45 Delivery angle HP sensor HP Other than HP
9 - - - -
A PS20 Paddle rotation HP sensor HP Other than HP
T-6-2
T-6-3
T-6-4
T-6-5