Canon Finisher-AK1, Service Manual

Page: 289 / 374

5
5
5-118
5-118
Adjustment > Auxiliary Adjustment > Adjusting Side Registration of Saddle > Procedure
Adjustment > Auxiliary Adjustment > Adjusting Side Registration of Saddle > Procedure
3) Go through the following steps to calculate displacement amount of the saddle stack guide.
3-1) Open the front cover [1].
3-2) Push the 3 claws [1], and remove the 3 knobs [2].
[2]
[1]
CAUTION:
When the One-way Clutch [1] inside the knob is removed, be sure to install it in the
direction where the arrow marking of the One-way Clutch is visible.
F-5-285
F-5-284
3-3) Lift the upper cover [1] in the arrow direction to remove the inner cover (upper) [2].
• 4 screws [3]
[2]
[3]
[1]
3-4) Remove the saddle inner cover (upper) [1].
• 1 knob [2]
• 2 screws [3]
[2]
[3]
[3]
[1]
F-5-286
F-5-287