Canon CXDI-1, Operation Manual

Page: 121 / 170

10. Before Calling a Service Engineer
– 113 –
10.2 Alert
Error
Code
Error Message (Upper box: Error type
Lower box: Error description)
Remedy
-4
System Info Error
Touch [OK] to close the window, and then see
1.2 Shutting Down the CXDI (
→
page 5) ,
and turn off the CXDI.
When these errors occur, note the error code
and contact a Canon representative or
distributor.
Driver info is updated.
If there is the trouble of sensor, the sensor power unit may not be supplied.
-5
System Info Error
Capture device info is updated.
If there is the trouble of sensor, the sensor power unit may not be supplied.
-6
System Info Error
A/D board info is updated.
If there is the trouble of sensor, the sensor power unit may not be supplied.
-7
System Info Error
LANMIT info is updated.
If there is the trouble of sensor, the sensor power unit may not be supplied.
-8
System Self Check Error: (Contents)
Call a service engineer and let him/her know the error code.
-115
Capture Board Error
Detected Capture Board Error.
-116
Sensor Unit: Self Check Error
Detected an Error.
-119
Image Error Touch [OK] to close the window.
Perform operations according to the messages
displayed.
Note the error code and contact a Canon
representative or distributor.
An error occurred in the image. Call a service person. Check the image in the
Preview-screen and also in the high-resolution monitor or by using [MAG.] or
[QA-MAG.] in the QA screen. Also, turn the power box off and on again to
restart the CXDI.
-546
Internal Storage Limit Warning:
Touch [OK] to close the window. The amount of available internal storage space has dropped below (current
settings). Images currently in storage commitment or that failed in storage
commitment will be automatically deleted.
-547
Internal Storage Limit Warning:
Touch [OK] to close the window and then see
6.4 Deleting the Image(s) (→ page 58) , and
delete the image.
The amount of available internal storage space has dropped below (current
settings). Check the contents of the study list.
-5002
OPU-CCR RPC Error Touch [OK] to close the window, and then see
1.2 Shutting Down the CXDI (
→
page 5) ,
and turn off the CXDI.
When these errors occur, note the error code
and contact a Canon representative or
distributor.
OPU-CCR RPC Error.
-6001
OPU-CCR RPC Error
Operation has been canceled.