Canon CXDI-1 Operation Manual Download Page 153

Page: 153 / 170

B. Using the Rejection Reason Input Function

– 145 –

Display the rejection reason input window.

Touch

[Reject]

When the multiview screen is displayed, directly touch the image to open the window,
and then touch

[Reject]

Rejection Reason Input Window

Select or enter the rejection reason.

Select the rejection reason from the Reject Reason List.
If the reason you want to enter is not found in the Reject Reason List, touch the Reject
Reason input box to display the keyboard, and then enter the reason.

Reject the image.

Touch

[OK]

Output the images.

Touch

[RESEND]

[RESEND ALL]

. The RESEND window or RESEND ALL

window is opened. Set LOCAL TEMP STORAGE to

[ON]

, and then touch

[RESEND]

[RESEND ALL]

Summary of Contents for CXDI-1











































































































































































Search results

Summary of Contents for CXDI-1

Reviews:

Related manuals for CXDI-1

Brands by name

Popular brands

Canon CXDI-1, Operation Manual

Search results

Summary of Contents for CXDI-1

Reviews:

Related manuals for CXDI-1

Brands by name

Popular brands