Canon CXDI-1 Operation Manual Download Page 98

Page: 98 / 170

7. Processing the Image (QA Mode Screen)

– 90 –

7.9 CORRECT PROC.

In this screen, the dosage-dependent sharpness of the image can be set, the stripes caused by the
fixed grid can be decreased, and the collimation mask can be set.

CORRECT PROC. Screen

7.9.1 Setting the Dosage-Dependent Sharpness Adjustment

Enable the dosage-dependent sharpness.

Touch and highlight (white character)

[D. DEPEND MTF. IMP]

Set the type.

Touch to open the window and select the body part.

Type Button Window

Set the intensity as required.

Touch or to select a setting from

0 to 3

The displayed value on the left is the saved value, and the value on the right is the modified
value.
Larger values provide more sharpness.

Summary of Contents for CXDI-1











































































































































































Search results

Summary of Contents for CXDI-1

Reviews:

Related manuals for CXDI-1

Brands by name

Popular brands

Canon CXDI-1, Operation Manual

Search results

Summary of Contents for CXDI-1

Reviews:

Related manuals for CXDI-1

Brands by name

Popular brands