Camlab Lovibond MD 610, Instruction Manual

Page: 264 / 371

258
MD 610_2d 11/2019
Silica LR/ Silicon dioxide LR
with Vario Powder Pack
and Liquid Reagent
0.1 – 1.6 mg/l SiO
2
Use two clean vials (24 mm Ø) and mark one as blank for
zeroing.
1. Fill each vial with 10 ml of the water sample .
2. Add 0.5 ml Vario Molybdate 3 reagent solution into
each vial.
3. Close the vials tightly with the caps and swirl several
times to mix the contents (Note 1).
4. Press [ ] key.
Wait for a reaction period of 4 minutes (Note 2).
After the reaction period is finished proceed as follows:
5. Add the contents of one Vario Silica Citric Acid F10
Powder Pack straight from the foil into each vial.
6. Close the vials tightly with the caps and swirl several
times to mix the contents.
7. Press [ ] key.
Wait for a reaction period of 1 minute (Note 3).
After the reaction period is finished proceed as follows:
8. Placethe vial (the blank) in the samplechamber making
sure that the
marks are aligned.
9. Add the contents of one Vario LRSilica Amino Acid
F F10 Powder Pack straight from the foil into the vial
(the sample).
10. Closethe vial tightly with the cap and swirl severaltimes
to mix the contents.
11. Press ZERO key (blank is already placed in the sample
chamber – seepoint 8).
Wait for a reaction period of 2 minutes .
Countdown
4:00
start:
Countdown
1:00
start:
1 2
3 4
5
1
3
Countdown
2:00
prepare Zero
press ZERO