Camlab Lovibond MD 610, Instruction Manual

Page: 188 / 371

182
MD 610_2d 11/2019
Molybdate / Molybdenum HR
with Liquid reagent
1 – 100 mg/l MoO
4
/ 0.6 – 60 mg/l Mo
1. Fill a clean vial (24 mm Ø) with 10 ml of the water
sample , closetightly with the cap.
2. Placethe vial in the sample chamber making sure that
the
marks are aligned.
3. Press ZERO key.
4. Removethe vial from the sample chamber.
5. Fill the vial with drops of the same size by holding the
bottle vertically and squeezeslowly:
10 drops KS63 (Thioglycolate)
6. Closethe vial tightly with the cap and swirl severaltimes
to mix the contents.
7. Placethe vial in the sample chamber making sure that
the
marks are aligned.
8. Press TEST key.
Wait for a reaction period of 5 minutes .
After the reaction period is finished the measurement
starts automatically.
The result is shown in the display in mg/l Molybdate /
Molybdenum.
prepare Zero
press ZERO
5
4
2
Zero accepted
prepare Test
press TEST
Countdown
5:00