Camlab Lovibond MD 610, Instruction Manual

Page: 281 / 371

275
MD 610_2d 11/2019
9. Swirl the vial (the sample) and than place the vial
(the sample) in the sample chamber making surethat
the marks are aligned. (note 7)
10. Press TEST key.
The result is shown in the display in mg/l SDSA.
Notes:
1. This method is adapted from MERCK.
2. Before performing the test read the original test instructions (delivered with the test) and
the MSDS(available at www.merckmillipore.com).
3. Spectroquant ® is a registered trade mark of the company MERCKKGaA.
4. Appropriate safety precautions and good lab technique should be used during the whole
procedure.
5. Becausereaction depends on temperature, tube temperature must be between 15 and
20°C; sample temperature must be between 10 and 20°C .
6. Sample volume should always be metered by using volumetric pipette (classA).
7. Should the lower phasebe turbid, warm the cell briefly with the hand.
8. The test sample should have a pH value between 5 and 10.
9.
SDSA
1)
SDBS 2)
SDS
3)
SDOSSA 4)
Reagent / Accessories Form of reagent/Quantity Order-No.
MERCKSpectroquant ® 1.02552.0001 Cell Test / 25 Tests 420763
1)
calculated as sodium 1-dodecanesulfonate (APHA5540, ASTM 2330-02, ISO7875-1)
2) calculated as sodium dodecylbenzenesulfonate (EPA425.1)
3)
calculated as sodium dodecyl sulfate
4) calculated as Sodium dioctyl sulfosuccinate
Zero accepted
prepare Test
press TEST