Camlab Lovibond MD 610, Instruction Manual

Page: 262 / 371

256
MD 610_2d 11/2019
Silica/Silicon dioxide
with Tablet
0.05 – 4 mg/l SiO
2
1. Fill a clean vial (24 mm Ø) with 10 ml of the water
sample , closetightly with the cap.
2. Placethe vial in the sample chamber making sure that
the
marks are aligned.
3. Press ZERO key.
4. Removethe vial from the sample chamber.
5. Add one SILICANo. 1 tablet straight from the foil to
the water sample and crush the tablet using a clean
stirring rod.
6. Closethe vial tightly with the cap and swirl severaltimes
until the tablet is dissolved.
7. Press[ ] key.
Wait for a
reaction period of 5 minutes .
After the reaction period is finished proceed as follows:
8. Add one SILICAPRtablet straight from the foil to the
same water sample and crush the tablet using a clean
stirring rod.
9. Add one SILICANo. 2 tablet straight from the foil to
the same water sample and crush the tablet using a
clean stirring rod.
10. Close the cap tightly and swirl several times until the
tablets are dissolved.
11. Placethe vial in the sample chamber making sure that
the marks are aligned.
prepare Zero
press ZERO
Countdown
5:00
start:
5
0
3