Cambium Networks PTP 250, User Manual

Page: 194 / 228

Web-based management Chapter 7: Operation
7-8 phn-2510_002v000 (Mar 2012)
The two ODUs are arranged in a master and slave relationship. The roles of the units in
this relationship are displayed in the page title. The master unit will always have the title ‘-
Master’, and the slave will always have ‘- Slave’ appended to the ‘Systems Status’ page
title.
The status page attributes are defined in Table 41 , Table 42 and Table 43 .
Table 41 System Status Equipment attributes
Attribute Meaning
System Name Name of this PTP 250 system (link). This is set in the Installation
Wizard; see
Step 1: Wireless configuration on page 6-22 .
Site Name Location of this link end. This is set in the Installation Wizard; see
Step 1: Wireless configuration on page 6-22 .
Software Version The version of firmware installed. The format of the attributes is
250-xx-yy where:
xx is system release,
yy minor system release.
Hardware Model Hardware model of this unit.
Hardware Version Hardware version of this unit.
Country The country in which this unit is configured to operate. This is set
at first login, as described in
Logging into the web interface on
page 6-6 . This can only be reset by restoring the unit to factory
default configuration, as described in Resetting to default
configuration (with country reset) on page 7-26 .
Elapsed Time
Indicator The time (days and hh:mm:ss) that has elapsed since the last
system reboot.
The system can reboot for several reasons, for example,
commanded reboot from the Reboot PTP 250 webpage, or a
power cycle of the equipment.