Cambium Networks PTP 250, User Manual

Page: 212 / 228

Restoring, resetting and rebooting Chapter 7: Operation
7-26 phn-2510_002v000 (Mar 2012)
Resetting to default configuration (with country reset)
Use the reset plug (supplied in each PTP 250 ‘Link Complete’ or ‘End Complete’ kit) to
reset the unit to factory default configuration, including reset of the country of operation
(this will have to be reselected at first login after the reset).
When the unit is reset to default configuration, the current configuration is lost and the
unit reboots, causing loss of service.
To reset the unit to factory defaults without resetting the country of operation, follow the
procedure in
Resetting to default configuration (no country reset) on page 7-25 .
To reset to default configuration including country reset, proceed as follows:
1 Remove the ODU drop cable from the PoE power supply DATA & POWER OUT
port.
2 Plug the ODU drop cable into the reset plug and then plug the reset plug into the
PoE power supply DATA & POWER OUT port:
3 Wait for at least 45 seconds.