Cambium Networks PTP 250, User Manual

Page: 170 / 228

Using the configuration wizard Chapter 6: Configuration and alignment
6-18 phn-2510_002v000 (Mar 2012)
Table 35 SNMP Configuration attributes
Attribute Meaning
SNMP Access:
Index The index of the table entry.
Community SNMP community string. This acts like a password between the
network management system and the distributed SNMP clients
(PTP 250 systems). Only if the community string is configured
correctly on all SNMP entities can the flow of management
information take place. By convention the default value is set to
‘public’.
Access Access level allowed. To allow operators to monitor the status of
links, SNMP clients (PTP 250 systems) are limited to read only
access to the SNMP server.
OID The point in the object identifier hierarchy at which access is
allowed.
SNMP Traps:
Index Sequential number of the trap destination.
Destination IP IP address of the SNMP server (trap receiver). This is normally
the network management system, but it may be a separate trap
receiver.
Destination Port Server port at which SNMP traps are received
Community SNMP community string (see above).
Version Version number of the trap destination. Select V1 or V2.
Alert
Configuration A list of events (or status changes). To select which events are to
generate alerts, tick the boxes in the SNMP column.
If SNMP and SMTP are both enabled, the Alert Configuration
section contains tick boxes for both SNMP and SMTP.