Cambium Networks PTP 250, User Manual

Page: 174 / 228

Using the wireless wizard Chapter 6: Configuration and alignment
6-22 phn-2510_002v000 (Mar 2012)
Step 1: Wireless configuration
Step 1 of the Installation wizard is for updating the wireless configuration ( Figure 37 ). The
attributes are described in Table 37. Update the attributes as required and select Next .
To comply with FCC rules, unselect any channels that may interfere with TDWR radars.
This must be done before the units are allowed to radiate on site. The system designer
will have provided a list of any affected channels, based on the instructions in
Avoidance
of weather radars (USA only) on page 2-5 .
When operating with external antennas in countries that impose an EIRP limit, choose an
external antenna and RF cable that will not cause the PTP 250 to exceed the EIRP limit,
based on the instructions in
Calculating maximum power level for connectorized units on
page 2-13 .
Figure 37 Step 1: Wireless Configuration page