Cambium Networks PTP 250, User Manual

Page: 209 / 228

PTP 250 User Guide Managing performance
phn-2510_002v000 (Mar 2012) 7-23
Diagnostics calculated over time
The System Status page ( Figure 47 ) contains seven diagnostic attributes that are
calculated over time and presented as arrays of four elements ( Figure 55 ).
Figure 55 Diagnostic attributes calculated over time
These attributes are defined in Table 43 .
The element arrays represent the following:
x
Max: The maximum value measured over the last hour.
x
Avg: The mean of a set of values recorded at one second intervals over the last hour.
x
Min: The minimum value measured the last hour.
x
Latest: The latest value measured.
If the link has been running for less than one hour, then the values are calculated over the
time that has elapsed since the link was established.
These attributes can be plotted against time, downloaded and reset by using the
Diagnostics Plotter page, as described in
Using the diagnostics plotter on page 7-21 .