PTP 250 User Guide
Upgrading firmware version
phn-2510_002v000 (Mar 2012)
6-9
Upgrading firmware version
Perform this task to ensure that the latest firmware version is installed on the unit.
This task consists of the following procedures:
x
Checking the installed firmware version
on page
6-9
x
Uploading a new firmware version
on page
6-10
If the link is operational, ensure that the remote end of the link is upgraded first using
the wireless connection, and then the local end can be upgraded. Otherwise, the remote
end may not be accessible.
Checking the installed firmware version
To check that the latest firmware version is installed, proceed as follows:
1
Select menu option
Status
. The System Status page is displayed.
2
Note the Software Version attribute (near the top left of the page):
3
Go to the support website
(
see
Contacting Cambium Networks
on page
2)
and find
Point-to-Point software updates.
4
Check that the latest available firmware version (for example 250-02-00) is the
same as the one already installed.
5
If the unit needs to be upgraded to the latest firmware version, perform
Saving the
system configuration
on page
6-34
and
Uploading a new firmware version
on page
6-10
.
Summary of Contents for PTP 250
