Connecting link to the network
Chapter 6: Configuration and alignment
6-32
phn-2510_002v000 (Mar 2012)
Connecting link to the network
When antenna alignment is complete, the link performance must be checked and then the
link connected to the network for operational running. Also, the system configuration
should be saved.
This task consists of the following procedures:
x
Reviewing system configuration attributes
on page
6-32
x
Comparing actual to predicted performance
on page
6-32
x
Connecting to the network
on page
6-33
x
Saving the system configuration
on page
6-34
Reviewing system configuration attributes
Revisit the configuration and wireless wizards to check that the link is correctly configured
for operational running. Refer to
Using the configuration wizard
on page
6-12
and
Using
the wireless wizard
on page
6-21
.
Comparing actual to predicted performance
For at least one hour of operation after disarming, monitor the link to check that it is
achieving predicted levels of performance. PTP LINKPlanner provides the prediction in the
form of an installation report.
To check performance, select menu option
Status
. The System Status page is displayed
(
Figure 40
). Monitor the following attributes:
x
Link Loss
x
Transmit Data Rate
x
Receive Data Rate
For more information on these attributes, refer to
Viewing the system status
on page
7-7
.
Summary of Contents for PTP 250
