Brüel & Kjær Vibro VIBROTEST 60 Technical Documentation Manual Download Page 163

Page: 163 / 172

VIBROTEST 60

Technical Data

_________________________________________________________________________________

C102 853.002

Page 159 of 168

12.4.4 Mounting

Coupling

General rule:

The weight of the acceleration sensor should be at least ten

times lower than the technically-vibrating weight of the object

being meaured and to which the sensor is attached.

General rule:

The weight of the acceleration sensor should be at least ten

times lower than the technically-vibrating weight of the object

being meaured and to which the sensor is attached.

Attachment options

There are three options for attaching the pickup to the machine:

•

Threaded stud

•

Probe

•

Magnet

Mounting of acceleration sensor

Note:

The acceleration sensor requires a friction-locked, contact-

resonance free and rigid mounting to the measuring object,

especially for measurement of high frequencies.

♦

AS-065 is to be mounted with the threaded stud supplied.

Selectable:

•

Stud M8 x 14 or

•

Stud M8 / 1/4“ 28 UNF

The sensor can be mounted in any position.

Summary of Contents for VIBROTEST 60













































































































































































Search results

Summary of Contents for VIBROTEST 60

Reviews:

Related manuals for VIBROTEST 60

Brands by name

Popular brands

Brüel & Kjær Vibro VIBROTEST 60, Technical Documentation Manual

Search results

Summary of Contents for VIBROTEST 60

Reviews:

Related manuals for VIBROTEST 60

Brands by name

Popular brands