Brüel & Kjær Vibro VIBROTEST 60 Technical Documentation Manual Download Page 33

Page: 33 / 172

VIBROTEST 60

SETUP - Adjustments

_________________________________________________________________________________

C102 853.002

Page 29 of 168

SETUP - Adjustments

4.1

System setup

The System setup is selected using either the softkey »Setup«

in the main menu or via the function button SETUP.

OK The displayed parameter setup resp.

adjustments are accepted and the previous

menu appears.
EDIT Switch to the functional selection/

entry menu for editing the para-meter

values.

4.1.1 Channels

Measurement channel 1

Channel 1 is active

Measurement channel 1+2

Channels 1 and 2 are active

Note:

When measurement channel 1 is selected, only the channel

that is designated as channel 1 will be active !

4.1.2 Setup 1=2

Identical configuration for channel 1+2

Yes*

Identical configuration for channel 1+2

∗

With the selection »Yes« the configuration of channel 2 is

overwritten by the configuration of channel 1. This provides

the user the option to quickly copy the setup from channel

to channel 2.

Summary of Contents for VIBROTEST 60













































































































































































Search results

Summary of Contents for VIBROTEST 60

Reviews:

Related manuals for VIBROTEST 60

Brands by name

Popular brands

Brüel & Kjær Vibro VIBROTEST 60, Technical Documentation Manual

Search results

Summary of Contents for VIBROTEST 60

Reviews:

Related manuals for VIBROTEST 60

Brands by name

Popular brands