VIBROTEST 60
Data-collector mode
_________________________________________________________________________________
© VTEST60E July 2013 V4.46ff
C102 853.002
Page 97 of 168
6
Data-collector mode
The task in the Data-collector mode is the acquisition of
measurements at predefined measurement intervals and
Points.
This operational mode is selected in the VIBROTEST 60 main
window.
Operating mode:
Menu title
Data Collector
SELECT The item on the menu highlighted by the cursor will
be selected.
INFO
Switch to the information display menu.
SETUP Opens the menu „System Setup„
REPORT Opens the Reports selection list.
6.1
Selecting the Route
The task configuration, i.e. the sequence of measurements and
the Point-specific Setup configuration in the form of Routes are
established in the PC program XMS and stored on the PC-card.
Date
Time
Menu title
Route name
Measurement Point statistics
SELECT Select the highlighted Route name for processing.
