Acquiring and displaying measurements
VIBROTEST 60
Page 74 of 168
C102 853.002
© VTEST60E July 2013 4.46ff
Amplitude Diagram
Amplitude diagram
Time range
Meas. range, Unit,
Signal detection, Scaling
Vibration measured value
Bandpass value
The graphic functions are identical to those in the display of
Measurement vs. Speed.
5.2
»Spectrum / Cepstrum«
5.2.1 Executing the measurement
logarithmic scaling
Info line *
Display range, Unit,
Signal detection, Scaling
Speed
* Info line:
»#1«: Number of averages completed (e.g. 1)
»0-1000 Hz«:
Frequency range
Depending on the settings in SETUP for the type and number
of averages the VIBROTEST 60 proceeds in various different
ways. Defining the averaging function is done in the window
»Setup Spectrum«.
START The measurement process is started. „STOP„ is dis-
played and the channel number flashes to indicate
that the measurement is in progress.
STOP
The measurement process is ended. „START“ is dis-
played to indicate that the measurement process has
stopped.
With the averaging function switched on (softkey
»AVERAGE«) and number of averages 4/16/64 the
measurement process is
automatically
stopped
when the set number of averages is reached.
