VIBROTEST 60
SETUP - Adjustments
_________________________________________________________________________________
© VTEST60E July 2013 V4.46ff
C102 853.002
Page 55 of 168
4.8.4.1.3 Direction
Coastdown*
Run-up*
∗
The setting is relevant for both channels.
At the end of the setup, confirm by pushing »OK«.
4.8.4.2 RECORD Mode f(t)
When the RECORD Mode f(t) is selected the following
parameters must be set up:
4.8.4.2.1 Measurement time T
T
maximum 9999 seconds
minimum 10 seconds
4.8.4.2.2 Interval
∆
t
∆
t
maximum 80 seconds
minimum 0.1 seconds
Note:
Within the measurement time interval
∆
t the measured values
are averaged.
At the end of the setup confirm by pushing »OK«.
