VIBROTEST 60
Acquiring and displaying measurements
_________________________________________________________________________________
© VTEST60E July 2013 V4.46ff
C102 853.002
Page 85 of 168
Averaging the measured values
The acquired measurements can be averaged.
The averaging function is switched on using the »AVERAGE«
softkey. The active averaging function in indicated by the
inverse display of the text „AVERAGE„. The averaging function
remains active until the function is switched off by pushing the
softkey »AVERAGE« again.
5.5.1 Listing function
Displayed measurements can be temporarily stored in a Listing
memory. The maximum capacity of the Listing memory is 100
entries.
For details of the Listing function see chapter 5.1.1.
