VIBROTEST 60
Introduction
_________________________________________________________________________________
© VTEST60E July 2013 V4.46ff
C102 853.002
Page 19 of 168
2.5
Operation
2.5.1 Softkeys
Various menus corresponding to the selected measurement,
analysis or configuration tasks are displayed. The bottom row in
each menu is reserved for the display of softkey text. By
pushing the softkey below the text the respective function is
selected.
Command line
Softkeys
Advice:
The command line shows functions that can be activated using
the softkeys.
The softkey text will be displayed in inverted form when the
function is activated.
If more than four softkeys exist for a specific meas-
urement task, further functions can be called using
the »More« softkey. Using this key all the functions of
the measurement task can be displayed.
»More» softkeys
Advice:
Only those softkey functions that can be activated are
displayed. If further functions are possible after a measure-
ment, the command line will change and further softkeys will be
displayed.
