Acquiring and displaying measurements
VIBROTEST 60
Page 96 of 168
C102 853.002
© VTEST60E July 2013 4.46ff
5.7
»Keyboard Input«
In Manual Entry measured values (numeric values) can be
entered and stored in the measurement memory of the
VIBROTEST 60.
The measured values (in numeric form) are entered using the
cursor-buttons (see also chapter 4.1).
When entering the window again the last entered value will be
displayed.
The entered value (numeric) remains until it is deleted with the
softkey button »CLEAR« or until it is overwritten by a new
value.
If the measured value is to be stored for a long period of time, it
should preferably be stored on the PC-card as a Report.
Storing of measured values (as Reports) on the PC-card is
described in chapter 8.
Optional units for Keyboard Input
Eu
in
m³/s
°C
rpm
t/h
F
MW
kg/s
N
kW
MPa
kN
A
kPa
µm
%
bar
mm
Nm
psi
mils
m³/h
dB
