Acquiring and displaying measurements
VIBROTEST 60
Page 80 of 168
C102 853.002
© VTEST60E July 2013 4.46ff
5.3
»Envelope Analysis / BCS«
Info line*
Display range,
Signal detection,
Scaling, Speed
* Info line:
»0-1000 Hz«:
Frequency range
Depending on the selections made in the SETUP for the type
and no. of averages the VIBROTEST 60 behaves in different
ways. Determination of the averaging function is done in the
window »Setup«.
START The measurement process is started. „STOP“ is dis-
played and the channel number flashes to indicate
that the measurement is in progress.
STOP
The measurement process is ended. „START“ is dis-
played to indicate that the measurement has
stopped.
When the averaging function is switched on (softkey
»AVERAGE«) and the number of averages 4/16/64 is
selected, the measurement process is
automatically
ended when the selected number of averages is
reached.
Y-axis zoom is active.
Using the cursor buttons , the cursor can be
moved.
X-axis zoom is active.
Using the cursor buttons , the cursor can be
moved.
Switching between the X- and Y-axis is done by
pushing the softkeys.
AVERAGE On / Off switch for the averaging function. The type
of averaging is determined in the SETUP.
> > >
This „More“ button leads to further functions.
The cursor and zoom functions are also active during meas-
urement. When a new measurement is started the current
cursor and zoom settings are retained.
